What is the Makeblock XTool D1? Xtool X100 X
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool X100 X
The company was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic University. The company is dedicated to developing cutting-edge products to aid people express themselves with development. Since its development, Makeblock has released a number of academic robotics, as well as a coding platform for children. It additionally introduced the MakeX Robotic Competition.
The XTool D1 is a portable laser engraver that can reducing and also etching a selection of products. Its laser can remove intricate shapes much faster than a scroll saw or jigsaw, and can be made use of for many different jobs. In addition to engraving, the D1 can additionally be used for various other tasks, including producing fashion jewelry and also light tones.
The D1 is a DIY set that can be assembled in just concerning half a hr. Its enclosure is foldable, enabling very easy transportability and efficient air flow. It is likewise made from flame-retardant polyester, making it safe from dust bits. The room additionally protects the functioning surface under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on metals and several various other materials. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This allows for finer engraving and also higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, that makes it possible to engrave on a wide range of materials. The D1 likewise has an integrated mobile phone app that can be downloaded and install from the Android Store or the Apple Application Store. The app can be utilized to import laser designs from totally free vector websites, consisting of Etsy. The D1 can also be connected to a computer system through USB or WiFi. It can likewise transfer information through Wi-Fi or a big capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most typically utilized timbers for laser cutters. The D1 can likewise cut on other timbers, consisting of difficult maple, walnut, and rosewood. Its laser head is flexible, enabling a 50mm range. It can likewise refine products approximately 10mm thick, which means that it has the ability to inscribe on a wide array of products. The D1 is developed for both residence and also organization use.
The XTool D1 can be found in 2 models: the 20W variation as well as the 5W version. The 20W version has a bigger laser head, and also a smaller sized working area. The 5W design has a workplace of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster device. Xtool X100 X
The D1 includes a steel structure, which supplies maximum security and also durability. It likewise has a simultaneous belt to enhance activity accuracy. The belt’s modest tension is required for precision, particularly when moving at high speeds. The concurrent belt can also aid the device keep steady and also minimize resonance. It can also remove the motion space, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it a superb choice for almost all engraving tasks. Its design is risk-free as well as reputable. It is perfect for small companies and also enthusiasts.
It can etch different sorts of metal as well as wood. It has the capacity to reduce eight to tenmm plywood in one pass. It additionally has the capacity to reduce leather and acrylic.
It features a variety of accessories. You can buy the bundle pack that consists of the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can additionally get a 1064nm laser head. This head reduces melt marks in plastic as well as is especially useful for fragile fashion jewelry layouts. It also has a motion sensor and flame detection sensing unit.
It likewise features an emergency situation stop button. It can be controlled via Wi-fi and also can import laser layouts from complimentary vector websites like Etsy. You can also manage it using the Makeblock XTool D1 app on Android as well as iphone.
It has a great emphasis system. The laser crosshairs relocate as needed as well as relocate to the framework of the art work. This makes the etching extremely precise. It can additionally be used to create a thickening effect, which can be helpful when engraving big products.
The XTool D1 Pro has actually boosted functions and laser power. It uses a 20W laser component to create a beam of light that reduces items in one pass. It can puncture 8mm black acrylic and 10mm basswood. It likewise has a greater speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing approach on this device is extremely clever. Alongside the laser module, there is a rotating arm which you take out when you intend to focus the laser. It guarantees that you drop the directly the appropriate range from the material. Then you tighten up the thumb screw and also swivel the arm back up. Xtool X100 X
XTool D1 Special Features
Right here are several of the leading Special Features of the XTool D1:
Wireless Connectivity
Device can be attached by means of USB or a Wi-fi. And also you can likewise manage with a mobile phone application on Android or iOS.
Cutting and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally a very qualified laser cutter.
Cut: Cardboard, Non-woven Material, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The machine can reduce wood, specifically Poplar plywood which is soft and also it is the favored wood for all laser cutters.
I would avoid some plastics like PVC and also plastic considering that it launches hydrogen chloride gas while being cut. This gas is harmful and very corrosive (your equipment will certainly rust promptly).
We have examined the maker with engraving and reducing different materials. You will locate the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other devices. This ought to enable more precision and much less mechanical wobble when inscribing at high speeds. Xtool X100 X
Advanced Stepper Motor Drivers
The machine has an extremely advanced controller board. It has Trinamic stepper motor drivers which drive the electric motors with a pure sine wave. In this manner the motors are very accurate and silent. The motorists also support homing procedure without utilizing limit switches over as the drivers measure current through electric motors as well as identify the limit in this manner. This is why this maker does not require physical limitation switches over for homing.
The maker has chauffeurs for 3 axis– so you can connect in the roller system as a Z axis instead of having to detach among the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver device instantly quits if an unexpected touch takes place. This is fantastic for people that are worried regarding security. The device is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software is very easy to use. When you have actually the art work prepared, you can make use of the app to set up the laser. You can likewise personalize the laser settings and also create custom-made artwork. The app additionally consists of a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing maker that can engrave over 100 materials. The laser engraver device is easy to use as well as comes with a protective cover. The device has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is a really versatile inscribing device. It cam be used to inscribe on all kinds of materials/.
Here is a listing of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well thought out device. Accurate, rapid and well developed. It comes with a premium price, yet it deserves it for someone that desires a great and also practically an industrial grade table leading laser engraver efficient in rapid cutting and exact inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The initial laser inscription as well as cutting device on our checklist is XTool D1 pro, the best choice to Glowforge. It is in starting point because it has gotten the Red Dot Design 2022 Honor. The impressive design and modern modern technology established this machine aside from various other devices on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and inscribe a massive variety of materials, from something as slim as cells paper to something as thick as natural leather as well as wood panels.
XTool D1 is a diode laser inscription and reducing device that is compatible with a large range of products, including various kinds of wood. Its effective as well as extremely concentrated laser can quickly cut and also inscribed wood with utmost precision as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is specifically produced steel and plastic inscription. It can etch numerous steels, consisting of light weight aluminum and precious metals. It can additionally do tinted inscribing on different metals, including aluminum.