What is the Makeblock XTool D1? Xtool V401 Manual
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool V401 Manual
The company was developed in 2012 by Jasen Wang, that examined airplane style at Northwestern Polytechnic University. The firm is devoted to producing cutting-edge items to help individuals reveal themselves with development. Since its development, Makeblock has actually launched a number of instructional robots, as well as a coding platform for children. It also launched the MakeX Robot Competitors.
The XTool D1 is a portable laser engraver that is capable of reducing and also etching a selection of materials. Its laser can remove detailed shapes much faster than a scroll saw or jigsaw, as well as can be made use of for various projects. In addition to engraving, the D1 can likewise be made use of for other projects, consisting of developing fashion jewelry and light shades.
The D1 is a DIY package that can be put together in only regarding half a hr. Its room is foldable, permitting simple transportability and also reliable ventilation. It is also made from flame-retardant polyester, making it risk-free from dust particles. The unit likewise protects the functioning surface area under the maker.
The XTool D1 is furnished with a laser module that can engrave on steels and lots of various other materials. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription and higher accuracy.
The D1 also has a high resolution of 1000 DPI, that makes it feasible to inscribe on a wide range of materials. The D1 likewise has an integrated mobile phone app that can be downloaded from the Android Store or the Apple App Store. The app can be made use of to import laser layouts from cost-free vector sites, consisting of Etsy. The D1 can also be linked to a computer system through USB or WiFi. It can likewise move information via Wi-Fi or a big capacity TF card.
The D1 can inscribing on Poplar plywood, which is one of the most typically used timbers for laser cutters. The D1 can also cut on other timbers, consisting of tough maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm array. It can also refine materials approximately 10mm thick, which means that it is able to etch on a wide variety of materials. The D1 is created for both residence and also company use.
The XTool D1 can be found in two designs: the 20W variation and the 5W model. The 20W version has a bigger laser head, as well as a smaller working area. The 5W model has a workspace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker maker. Xtool V401 Manual
The D1 includes a steel frame, which provides optimum security and also sturdiness. It additionally has a simultaneous belt to boost movement accuracy. The belt’s moderate tension is required for precision, particularly when relocating at high speeds. The simultaneous belt can additionally help the maker remain secure and reduce resonance. It can additionally remove the movement space, permitting fine vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it an outstanding option for mostly all etching jobs. Its design is secure and reputable. It is suitable for small businesses as well as enthusiasts.
It can inscribe various kinds of steel as well as wood. It has the ability to cut 8 to tenmm plywood in one pass. It additionally has the capability to cut leather as well as acrylic.
It comes with a variety of accessories. You can purchase the package pack that consists of the Air Help Establish and also Honeycomb Working Panel. It sets you back $119 as well as $269, specifically. You can also get a 1064nm laser head. This head decreases burn marks in plastic and is particularly beneficial for delicate jewelry layouts. It likewise has a movement sensor and fire discovery sensing unit.
It also includes an emergency situation quit button. It can be regulated through WiFi and also can import laser styles from complimentary vector sites like Etsy. You can additionally control it by means of the Makeblock XTool D1 application on Android as well as iphone.
It has a great emphasis system. The laser crosshairs relocate as needed and also transfer to the frame of the art work. This makes the engraving very precise. It can also be utilized to create a thickening effect, which can be helpful when etching large items.
The XTool D1 Pro has actually boosted features as well as laser power. It makes use of a 20W laser component to create a beam of light that reduces things in one pass. It can puncture 8mm black acrylic and also 10mm basswood. It additionally has a higher rate. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this equipment is really creative. Beside the laser component, there is a rotating arm which you take out when you wish to focus the laser. It assures that you drop the directly the appropriate distance from the material. Then you tighten the thumb screw as well as swivel the arm back up. Xtool V401 Manual
XTool D1 Special Features
Here are a few of the leading Unique Functions of the XTool D1:
Wireless Connectivity
Equipment can be connected by means of USB or a WiFi. And also you can likewise regulate with a smartphone app on Android or iOS.
Trimming and Engraving Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick stuff with this laser engraver. The device can reduce wood, specifically Poplar plywood which is soft and it is the favored wood for all laser cutters.
I would avoid some plastics like PVC and also plastic considering that it launches hydrogen chloride gas while being reduced. This gas is poisonous and also really corrosive (your machine will certainly rust rapidly).
We have tested the device with engraving and also cutting different materials. You will locate the results of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other makers. This need to allow for more precision and also much less mechanical wobble when etching at high speeds. Xtool V401 Manual
Advanced Stepper Motor Drivers
The equipment has a very sophisticated controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. This way the motors are very precise and quiet. The vehicle drivers also support homing treatment without using restriction changes as the motorists gauge present via motors and also find the limit this way. This is why this equipment does not need physical limit switches for homing.
The maker has motorists for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver tool immediately quits if an unintended touch happens. This is wonderful for individuals who are worried about safety. The device is also suitable with Windows and Mac OS systems.
The XTool D1 software program is very easy to use. As soon as you have the artwork prepared, you can utilize the application to establish the laser. You can also personalize the laser setups and also create custom artwork. The app also includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 products. The laser engraver device is easy to use and also includes a safety cover. The maker has a warranty of year.
XTool D1 Engraving
The XTool D1 is a very functional etching equipment. It cam be made use of to etch on all kinds of products/.
Here is a checklist of products as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered equipment. Precise, quick as well as sturdily built. It comes at a premium price, yet it is worth it for someone that desires a good as well as nearly an industrial quality table top laser engraver capable of quick cutting and also specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription as well as reducing device on our listing is XTool D1 pro, the most effective option to Glowforge. It remains in starting point due to the fact that it has gotten the Red Dot Design 2022 Honor. The exceptional layout and cutting edge innovation set this equipment apart from various other equipments on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also etch a significant range of products, from something as slim as tissue paper to something as thick as natural leather and timber panels.
XTool D1 is a diode laser inscription as well as reducing device that is compatible with a wide variety of products, consisting of different kinds of timber. Its powerful as well as very focused laser can quickly reduce as well as engraved timber with best precision and also accuracy.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser module, which is specifically created metal as well as plastic inscription. It can inscribe numerous metals, including aluminum and rare-earth elements. It can likewise do tinted engraving on numerous steels, consisting of aluminum.