What is the Makeblock XTool D1? Xtool Programer
XTool D1 is a laser cutter that has actually been developed by Makeblock. Xtool Programer
The firm was established in 2012 by Jasen Wang, who studied airplane style at Northwestern Polytechnic College. The firm is committed to developing ingenious products to assist people share themselves through development. Considering that its development, Makeblock has actually released numerous instructional robotics, as well as a coding system for youngsters. It likewise launched the MakeX Robot Competition.
The XTool D1 is a portable laser engraver that can reducing and etching a range of products. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, as well as can be used for various tasks. In addition to inscription, the D1 can also be used for various other projects, including developing jewelry and also light shades.
The D1 is a DIY package that can be put together in just about half a hr. Its unit is collapsible, enabling very easy transportability and effective air flow. It is likewise constructed from flame-retardant polyester, making it safe from dirt particles. The enclosure likewise shields the working surface area under the device.
The XTool D1 is outfitted with a laser module that is capable of engrave on steels and numerous various other products. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This allows for finer inscription as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to etch on a wide variety of materials. The D1 likewise has an integrated smart device application that can be downloaded and install from the Android Shop or the Apple App Store. The application can be used to import laser layouts from cost-free vector sites, including Etsy. The D1 can also be attached to a computer using USB or WiFi. It can likewise transfer data using Wi-Fi or a big capability TF card.
The D1 can etching on Poplar plywood, which is among one of the most typically utilized woods for laser cutters. The D1 can likewise reduce on other timbers, including difficult maple, walnut, and rosewood. Its laser head is adjustable, enabling a 50mm array. It can likewise refine materials up to 10mm thick, which means that it is able to etch on a variety of products. The D1 is created for both residence and also business use.
The XTool D1 is available in 2 models: the 20W version as well as the 5W model. The 20W variation has a bigger laser head, as well as a smaller sized working area. The 5W model has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a faster maker. Xtool Programer
The D1 includes a steel frame, which provides maximum security and sturdiness. It additionally has a simultaneous belt to improve motion precision. The belt’s moderate tension is needed for accuracy, especially when moving at high speeds. The concurrent belt can also help the device remain stable as well as decrease resonance. It can likewise remove the activity void, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the marketplace. It generates clear lines down to 0.06 mm. This makes it an excellent option for mostly all inscribing jobs. Its layout is safe and reputable. It is ideal for local business as well as enthusiasts.
It can etch various sorts of steel as well as wood. It has the capacity to cut 8 to tenmm plywood in one pass. It additionally has the capacity to reduce natural leather and also acrylic.
It comes with a variety of devices. You can purchase the package pack that includes the Air Assist Set and also Honeycomb Working Panel. It costs $119 and $269, respectively. You can likewise obtain a 1064nm laser head. This head reduces burn marks in plastic as well as is especially useful for fragile jewelry styles. It additionally has an activity sensor and flame discovery sensor.
It likewise includes an emergency situation stop switch. It can be regulated with Wi-fi as well as can import laser layouts from totally free vector sites like Etsy. You can also regulate it by means of the Makeblock XTool D1 application on Android and also iOS.
It has a very good focus mechanism. The laser crosshairs relocate as required and relocate to the frame of the art work. This makes the etching very accurate. It can additionally be made use of to develop a thickening effect, which can be valuable when inscribing big products.
The XTool D1 Pro has improved features as well as laser power. It makes use of a 20W laser module to produce a beam of light that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can get to engraving accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating approach on this machine is very smart. Beside the laser module, there is a rotating arm which you pull out when you intend to concentrate the laser. It guarantees that you drop the head on the correct distance from the material. Then you tighten up the thumb screw and also rotate the arm back up. Xtool Programer
XTool D1 Special Features
Right here are some of the top Unique Functions of the XTool D1:
Wireless Connection
Equipment can be connected through USB or a WiFi. And also you can additionally control with a mobile phone application on Android or iOS.
Cutting and also Inscription Different Products
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is additionally an extremely capable laser cutter.
Cut: Cardboard, Non-woven Textile, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick stuff with this laser engraver. The machine can reduce timber, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would prevent some plastics like PVC as well as plastic given that it launches hydrogen chloride gas while being reduced. This gas is hazardous as well as really harsh (your machine will rust swiftly).
We have tested the machine with engraving and cutting different products. You will locate the outcomes of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other devices. This should allow for more precision as well as much less mechanical wobble when etching at high speeds. Xtool Programer
Advanced Stepper Electric Motor Drivers
The device has a really sophisticated controller board. It has Trinamic stepper electric motor drivers which drive the motors with a pure sine wave. By doing this the electric motors are really exact as well as quiet. The drivers also sustain homing procedure without making use of limit changes as the drivers measure existing through electric motors and also discover the limit by doing this. This is why this machine does not need physical limit switches for homing.
The maker has motorists for 3 axis– so you can connect in the roller system as a Z axis as opposed to needing to disconnect one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be regulated via Wi-Fi or USB. The laser engraver device automatically quits if an accidental touch happens. This is terrific for people who are concerned regarding safety. The device is likewise suitable with Windows and also Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have actually the art work prepared, you can utilize the application to set up the laser. You can also tailor the laser setups and develop personalized artwork. The app also includes a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 materials. The laser engraver tool is easy to use and includes a protective cover. The machine has a service warranty of year.
XTool D1 Engraving
The XTool D1 is a really functional inscribing machine. It cam be used to inscribe on all sorts of products/.
Here is a list of materials as well as functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an extremely well considered machine. Exact, fast as well as sturdily constructed. It comes at a premium price, however it is worth it for somebody that desires a great as well as nearly an industrial quality table leading laser engraver capable of quick cutting and also specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser inscription and reducing device on our checklist is XTool D1 pro, the best choice to Glowforge. It remains in first place since it has actually obtained the Red Dot Design 2022 Award. The outstanding layout as well as cutting edge innovation established this equipment in addition to other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm timber board at one time, and XTool D1-10W can reduce 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as engrave a big selection of products, from something as slim as tissue paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser engraving as well as reducing maker that is compatible with a variety of materials, including different kinds of timber. Its powerful and very concentrated laser can conveniently reduce and also engraved wood with supreme precision as well as precision.
Can the XTool D1 engrave alliminum?
You can also obtain the infrared laser component, which is especially produced metal and plastic inscription. It can inscribe numerous steels, consisting of aluminum as well as precious metals. It can also do tinted engraving on various steels, including light weight aluminum.