What is the Makeblock XTool D1? Xtool Official Store
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool Official Store
The company was established in 2012 by Jasen Wang, that researched aircraft design at Northwestern Polytechnic University. The firm is dedicated to producing innovative products to aid people express themselves with development. Given that its development, Makeblock has actually launched numerous academic robotics, in addition to a coding system for youngsters. It additionally released the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can cutting and inscribing a selection of products. Its laser can eliminate complex forms much faster than a scroll saw or jigsaw, and also can be utilized for several jobs. In addition to inscription, the D1 can also be used for other projects, consisting of developing fashion jewelry as well as lamp shades.
The D1 is a do it yourself kit that can be put together in just concerning half a hr. Its enclosure is collapsible, allowing for very easy transportability and efficient air flow. It is likewise made of flame-retardant polyester, making it secure from dirt fragments. The room additionally protects the functioning surface under the machine.
The XTool D1 is equipped with a laser module that is capable of engrave on steels and numerous various other products. It has an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer engraving as well as higher accuracy.
The D1 additionally has a high resolution of 1000 DPI, which makes it possible to etch on a wide range of products. The D1 likewise has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be made use of to import laser styles from totally free vector sites, consisting of Etsy. The D1 can additionally be attached to a computer by means of USB or WiFi. It can also transfer information through Wi-Fi or a big capacity TF card.
The D1 is capable of etching on Poplar plywood, which is among the most typically made use of timbers for laser cutters. The D1 can additionally reduce on other woods, including tough maple, walnut, as well as rosewood. Its laser head is flexible, enabling a 50mm array. It can also process products as much as 10mm thick, which suggests that it is able to etch on a wide array of products. The D1 is created for both home and service use.
The XTool D1 is available in 2 models: the 20W variation and the 5W design. The 20W variation has a larger laser head, as well as a smaller sized working location. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a quicker machine. Xtool Official Store
The D1 includes a steel frame, which supplies optimum stability and resilience. It likewise has a simultaneous belt to enhance movement accuracy. The belt’s moderate tension is required for accuracy, specifically when moving at high speeds. The synchronous belt can also help the machine remain stable as well as reduce vibration. It can also remove the movement gap, enabling fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It produces clear lines to 0.06 mm. This makes it an exceptional selection for almost all inscribing tasks. Its layout is safe and reliable. It is excellent for local business as well as enthusiasts.
It can etch various sorts of metal and timber. It has the capability to reduce eight to tenmm plywood in one pass. It likewise has the capacity to cut leather and also acrylic.
It features a variety of accessories. You can acquire the package pack that consists of the Air Assist Establish and Honeycomb Working Panel. It costs $119 and $269, specifically. You can likewise get a 1064nm laser head. This head reduces shed marks in plastic and also is especially valuable for delicate fashion jewelry designs. It also has a movement sensing unit and also fire detection sensor.
It likewise includes an emergency stop switch. It can be controlled through Wi-fi and also can import laser layouts from free vector sites like Etsy. You can also regulate it using the Makeblock XTool D1 app on Android and also iphone.
It has a very good emphasis system. The laser crosshairs relocate as needed and transfer to the structure of the art work. This makes the engraving extremely specific. It can also be utilized to develop a thickening effect, which can be useful when inscribing big things.
The XTool D1 Pro has improved features as well as laser power. It uses a 20W laser component to develop a light beam that reduces objects in one pass. It can cut through 8mm black acrylic and 10mm basswood. It additionally has a greater rate. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The focusing technique on this device is very clever. Beside the laser component, there is a rotating arm which you pull out when you wish to focus the laser. It ensures that you go down the directly the correct range from the material. After that you tighten up the thumb screw as well as rotate the arm back up. Xtool Official Store
XTool D1 Special Features
Right here are some of the top Unique Features of the XTool D1:
Wireless Connectivity
Machine can be linked using USB or a WiFi. As well as you can likewise control with a smart device app on Android or iOS.
Trimming and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and also Paint Surface Area Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can cut wood, particularly Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would avoid some plastics like PVC and plastic considering that it releases hydrogen chloride gas while being cut. This gas is harmful and also very destructive (your machine will rust swiftly).
We have actually evaluated the device with engraving and also reducing various products. You will certainly locate the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have actually seen on all various other devices. This need to permit more precision and much less mechanical wobble when engraving at high speeds. Xtool Official Store
Advanced Stepper Electric Motor Drivers
The maker has a very advanced controller board. It has Trinamic stepper electric motor vehicle drivers which drive the electric motors with a pure sine wave. In this manner the electric motors are very exact and silent. The vehicle drivers additionally support homing treatment without making use of restriction changes as the drivers determine current through electric motors as well as detect the limit by doing this. This is why this machine does not require physical restriction changes for homing.
The equipment has vehicle drivers for 3 axis– so you can connect in the roller system as a Z axis rather than needing to separate one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed by means of Wi-Fi or USB. The laser engraver tool automatically stops if an unintended touch happens. This is fantastic for people that are concerned about safety. The tool is additionally compatible with Windows as well as Mac OS systems.
The XTool D1 software is extremely easy to use. When you have actually the art work prepared, you can utilize the app to establish the laser. You can likewise tailor the laser setups as well as produce custom-made artwork. The app additionally consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing equipment that can inscribe over 100 materials. The laser engraver tool is easy to use and also features a safety cover. The device has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely versatile inscribing maker. It cam be utilized to etch on all kinds of materials/.
Below is a checklist of products and functions that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Specific, rapid and well constructed. It comes with a costs cost, but it deserves it for someone that desires an excellent and also nearly a commercial quality table leading laser engraver capable of fast cutting and specific inscription thanks to an effective 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and cutting device on our checklist is XTool D1 pro, the most effective alternative to Glowforge. It remains in starting point since it has actually received the Red Dot Layout 2022 Award. The impressive design and also modern technology established this machine aside from various other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and also XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at once, and XTool D1-10W can cut 10mm timber board at once.
Can XTool D1 cut leather?
XTool can reduce as well as inscribe a massive selection of materials, from something as slim as cells paper to something as thick as natural leather and also timber panels.
XTool D1 is a diode laser engraving and cutting device that works with a large range of products, including various types of wood. Its effective as well as extremely concentrated laser can quickly reduce as well as inscribed wood with best precision and precision.
Can the XTool D1 engrave alliminum?
You can additionally get the infrared laser component, which is particularly created metal and plastic inscription. It can inscribe different metals, including light weight aluminum and precious metals. It can also do colored engraving on different metals, including aluminum.