What is the Makeblock XTool D1? Xtool Forum
XTool D1 is a laser cutter that has been created by Makeblock. Xtool Forum
The company was established in 2012 by Jasen Wang, who studied aircraft style at Northwestern Polytechnic College. The company is committed to creating cutting-edge products to assist individuals express themselves through development. Given that its development, Makeblock has launched a number of academic robots, in addition to a coding platform for kids. It likewise released the MakeX Robot Competition.
The XTool D1 is a mobile laser engraver that can reducing as well as inscribing a selection of materials. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, as well as can be utilized for various projects. Along with engraving, the D1 can likewise be made use of for other projects, consisting of creating precious jewelry as well as lamp tones.
The D1 is a DIY set that can be constructed in only about half a hr. Its room is foldable, allowing for simple mobility and also reliable air flow. It is likewise made of flame-retardant polyester, making it risk-free from dust particles. The room additionally protects the functioning surface under the equipment.
The XTool D1 is equipped with a laser module that can engrave on metals as well as numerous various other products. It has actually an ultra-fine pressed laser area of 0.08 x 0.08 mm. This permits finer inscription and also higher precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to etch on a vast array of products. The D1 additionally has a built-in mobile phone application that can be downloaded and install from the Android Shop or the Apple App Shop. The application can be used to import laser designs from free vector websites, including Etsy. The D1 can additionally be linked to a computer using USB or WiFi. It can likewise transfer information through Wi-Fi or a big ability TF card.
The D1 can engraving on Poplar plywood, which is just one of the most typically used timbers for laser cutters. The D1 can likewise reduce on other woods, including hard maple, walnut, and rosewood. Its laser head is adjustable, permitting a 50mm range. It can likewise process products approximately 10mm thick, which implies that it is able to etch on a wide array of materials. The D1 is developed for both house as well as service usage.
The XTool D1 can be found in 2 designs: the 20W variation as well as the 5W design. The 20W version has a bigger laser head, and also a smaller sized working location. The 5W design has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a much faster maker. Xtool Forum
The D1 features a steel frame, which offers optimum stability and also longevity. It also has a simultaneous belt to boost activity precision. The belt’s moderate tension is required for precision, specifically when relocating at broadband. The simultaneous belt can likewise assist the device remain steady and reduce resonance. It can likewise eliminate the movement space, permitting fine vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines to 0.06 mm. This makes it an outstanding choice for nearly all etching tasks. Its layout is risk-free as well as reputable. It is suitable for small companies as well as hobbyists.
It can etch different sorts of metal and wood. It has the capacity to cut eight to tenmm plywood in one pass. It also has the capability to cut leather and acrylic.
It includes a number of devices. You can purchase the package pack that includes the Air Help Set and Honeycomb Working Panel. It sets you back $119 and $269, specifically. You can likewise get a 1064nm laser head. This head minimizes melt marks in plastic and is particularly valuable for delicate precious jewelry layouts. It likewise has a movement sensor and flame discovery sensor.
It additionally features an emergency quit button. It can be controlled via Wi-fi and can import laser designs from totally free vector sites like Etsy. You can also regulate it by means of the Makeblock XTool D1 application on Android and also iOS.
It has a great focus system. The laser crosshairs relocate as required as well as move to the framework of the artwork. This makes the etching very accurate. It can likewise be used to develop a thickening effect, which can be helpful when inscribing huge things.
The XTool D1 Pro has actually enhanced attributes as well as laser power. It uses a 20W laser component to produce a light beam that cuts things in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It likewise has a higher speed. It can get to engraving precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this equipment is really clever. Beside the laser component, there is a swivelling arm which you pull out when you intend to concentrate the laser. It guarantees that you go down the directly the correct distance from the product. Then you tighten the thumb screw and pivot the arm back up. Xtool Forum
XTool D1 Special Features
Here are some of the top Unique Attributes of the XTool D1:
Wireless Connectivity
Device can be connected by means of USB or a Wi-fi. As well as you can likewise control with a smartphone app on Android or iOS.
Cutting as well as Engraving Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick stuff with this laser engraver. The device can cut timber, particularly Poplar plywood which is soft as well as it is the favored wood for all laser cutters.
I would stay clear of some plastics like PVC as well as vinyl because it releases hydrogen chloride gas while being cut. This gas is harmful as well as extremely destructive (your machine will certainly rust rapidly).
We have tested the equipment with inscription as well as cutting various products. You will locate the results of our tests few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all various other machines. This must permit more accuracy and much less mechanical wobble when inscribing at high speeds. Xtool Forum
Advanced Stepper Motor Drivers
The maker has a very sophisticated controller board. It has Trinamic stepper motor chauffeurs which drive the motors with a pure sine wave. In this manner the electric motors are very precise and also silent. The drivers likewise sustain homing procedure without utilizing restriction switches as the motorists determine existing via motors and spot the limit by doing this. This is why this machine does not require physical limit switches over for homing.
The maker has drivers for 3 axis– so you can connect in the roller system as a Z axis rather than needing to disconnect among the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled by means of Wi-Fi or USB. The laser engraver device instantly stops if an unintentional touch takes place. This is terrific for people who are concerned concerning security. The device is additionally suitable with Windows and also Mac OS systems.
The XTool D1 software is very easy to use. When you have the artwork prepared, you can make use of the application to set up the laser. You can additionally customize the laser setups as well as produce custom-made art work. The application likewise includes a materials list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting equipment that can inscribe over 100 products. The laser engraver device is easy to use as well as includes a safety cover. The machine has a warranty of twelve month.
XTool D1 Engraving
The XTool D1 is an extremely versatile engraving machine. It cam be used to etch on all types of materials/.
Below is a listing of products and features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out device. Precise, fast as well as sturdily constructed. It comes with a premium price, but it deserves it for a person that wants a great and practically a commercial grade table leading laser engraver with the ability of fast cutting and specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The very first laser inscription as well as reducing maker on our listing is XTool D1 pro, the best alternative to Glowforge. It remains in first place since it has actually received the Red Dot Design 2022 Award. The outstanding design and modern modern technology established this device aside from various other machines on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, and XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also etch a big range of materials, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser inscription and cutting machine that is compatible with a vast array of products, including different types of timber. Its powerful and very concentrated laser can conveniently reduce and etched timber with best accuracy as well as accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is specifically produced steel as well as plastic inscription. It can inscribe various metals, consisting of aluminum and precious metals. It can also do tinted inscribing on different steels, including aluminum.