What is the Makeblock XTool D1? Xtool D1 No Mod Air Assist
XTool D1 is a laser cutter that has been produced by Makeblock. Xtool D1 No Mod Air Assist
The firm was established in 2012 by Jasen Wang, that researched airplane design at Northwestern Polytechnic University. The business is dedicated to developing cutting-edge products to aid people share themselves via creation. Because its creation, Makeblock has actually launched a number of academic robotics, in addition to a coding system for kids. It additionally launched the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can reducing and also etching a range of products. Its laser can remove detailed forms much faster than a scroll saw or jigsaw, and can be made use of for many different jobs. Along with inscription, the D1 can likewise be made use of for various other projects, consisting of creating precious jewelry and also lamp shades.
The D1 is a DIY kit that can be put together in just regarding half a hr. Its unit is foldable, allowing for simple portability and also effective ventilation. It is likewise made from flame-retardant polyester, making it secure from dust fragments. The unit also safeguards the working surface under the machine.
The XTool D1 is furnished with a laser module that is capable of engrave on steels as well as lots of other products. It has an ultra-fine compressed laser place of 0.08 x 0.08 mm. This enables finer inscription and also higher precision.
The D1 additionally has a high resolution of 1000 DPI, which makes it feasible to etch on a large range of materials. The D1 likewise has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple App Shop. The application can be used to import laser layouts from complimentary vector websites, including Etsy. The D1 can additionally be linked to a computer through USB or WiFi. It can also move data by means of Wi-Fi or a large capability TF card.
The D1 is capable of engraving on Poplar plywood, which is one of one of the most commonly used timbers for laser cutters. The D1 can additionally cut on other woods, consisting of tough maple, walnut, and rosewood. Its laser head is flexible, allowing for a 50mm variety. It can also process materials as much as 10mm thick, which suggests that it has the ability to engrave on a wide variety of materials. The D1 is made for both residence as well as company usage.
The XTool D1 comes in two versions: the 20W version and the 5W model. The 20W version has a bigger laser head, as well as a smaller working area. The 5W model has a workplace of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster device. Xtool D1 No Mod Air Assist
The D1 includes a steel frame, which provides maximum stability and also durability. It additionally has a synchronous belt to boost activity accuracy. The belt’s moderate tension is needed for accuracy, specifically when relocating at broadband. The concurrent belt can likewise assist the equipment keep steady and also minimize vibration. It can also eliminate the motion space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most effective diode laser on the market. It creates clear lines to 0.06 mm. This makes it a superb selection for nearly all engraving tasks. Its layout is risk-free and also reputable. It is excellent for small companies as well as hobbyists.
It can engrave various kinds of metal and also wood. It has the ability to reduce eight to tenmm plywood in one pass. It also has the capability to cut natural leather and polymer.
It comes with a variety of devices. You can buy the package pack that includes the Air Help Set as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can likewise obtain a 1064nm laser head. This head minimizes burn marks in plastic and also is specifically valuable for fragile fashion jewelry designs. It likewise has an activity sensing unit and also fire discovery sensor.
It also features an emergency stop button. It can be controlled with Wi-fi as well as can import laser layouts from cost-free vector sites like Etsy. You can likewise regulate it through the Makeblock XTool D1 application on Android and also iphone.
It has an excellent emphasis device. The laser crosshairs move as required and move to the framework of the art work. This makes the etching very specific. It can likewise be made use of to produce a thickening result, which can be useful when engraving large things.
The XTool D1 Pro has improved functions and also laser power. It utilizes a 20W laser component to produce a beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It additionally has a greater speed. It can reach inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this device is extremely brilliant. Alongside the laser component, there is a pivoting arm which you take out when you wish to focus the laser. It guarantees that you go down the head on the proper range from the product. After that you tighten the thumb screw as well as rotate the arm back up. Xtool D1 No Mod Air Assist
XTool D1 Special Features
Below are some of the top Unique Attributes of the XTool D1:
Wireless Connection
Machine can be connected using USB or a Wi-fi. And you can additionally regulate with a mobile phone app on Android or iOS.
Trimming and Engraving Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is additionally an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Material, Wood Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can cut greater than 10mm thick things with this laser engraver. The maker can reduce timber, especially Poplar plywood which is soft and it is the favored timber for all laser cutters.
I would certainly stay clear of some plastics like PVC and also plastic since it releases hydrogen chloride gas while being cut. This gas is poisonous as well as extremely corrosive (your machine will rust rapidly).
We have checked the device with inscription and also reducing different materials. You will certainly discover the outcomes of our examinations couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have actually seen on all other equipments. This must enable even more accuracy as well as less mechanical wobble when etching at broadband. Xtool D1 No Mod Air Assist
Advanced Stepper Motor Drivers
The machine has an extremely advanced controller board. It has Trinamic stepper electric motor motorists which drive the electric motors with a pure sine wave. By doing this the motors are really exact and also silent. The vehicle drivers also sustain homing treatment without utilizing limit switches over as the vehicle drivers determine existing with electric motors and discover the limit this way. This is why this device does not need physical limitation changes for homing.
The machine has motorists for 3 axis– so you can connect in the roller system as a Z axis instead of having to detach among the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated by means of Wi-Fi or USB. The laser engraver device instantly quits if an unintentional touch happens. This is wonderful for individuals who are worried concerning safety. The device is likewise suitable with Windows and Mac OS systems.
The XTool D1 software is very easy to use. Once you have actually the artwork prepared, you can use the app to establish the laser. You can additionally personalize the laser settings and also produce personalized artwork. The app likewise consists of a products listing.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can inscribe over 100 products. The laser engraver tool is easy to use as well as includes a safety cover. The maker has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely functional inscribing maker. It cam be made use of to etch on all sorts of products/.
Here is a listing of products and functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a quite possibly thought out device. Accurate, rapid and also well constructed. It comes with a costs price, yet it is worth it for a person that wants a good and also virtually an industrial quality table leading laser engraver efficient in rapid cutting and also accurate inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The first laser engraving as well as reducing device on our listing is XTool D1 pro, the best option to Glowforge. It remains in first place because it has gotten the Red Dot Layout 2022 Award. The superior design and also advanced innovation established this machine besides other makers on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and also XTool D1-10W can cut 10mm timber board at one time.
Can XTool D1 cut leather?
XTool can cut as well as engrave a substantial range of products, from something as slim as cells paper to something as thick as natural leather and also wood panels.
XTool D1 is a diode laser engraving and cutting maker that is compatible with a wide range of products, consisting of different types of timber. Its effective and also extremely concentrated laser can quickly cut and also engraved wood with best precision and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is particularly created steel and also plastic engraving. It can etch different steels, consisting of light weight aluminum as well as precious metals. It can additionally do colored engraving on different steels, including aluminum.