What is the Makeblock XTool D1? Xtool D1 Diode Laser
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool D1 Diode Laser
The firm was established in 2012 by Jasen Wang, who researched aircraft layout at Northwestern Polytechnic University. The business is committed to producing cutting-edge products to aid individuals express themselves through development. Considering that its production, Makeblock has actually released numerous academic robots, along with a coding system for kids. It likewise launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also inscribing a selection of products. Its laser can cut out complex shapes much faster than a scroll saw or jigsaw, and can be used for various jobs. Along with engraving, the D1 can likewise be utilized for other jobs, including developing fashion jewelry and also lamp tones.
The D1 is a DIY package that can be constructed in only about half a hr. Its room is collapsible, allowing for very easy transportability and also reliable air flow. It is also constructed from flame-retardant polyester, making it secure from dust particles. The enclosure likewise safeguards the functioning surface under the device.
The XTool D1 is furnished with a laser module that is capable of engrave on steels and numerous other materials. It has actually an ultra-fine compressed laser spot of 0.08 x 0.08 mm. This permits finer inscription as well as greater accuracy.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to etch on a vast array of materials. The D1 also has a built-in smartphone app that can be downloaded and install from the Android Shop or the Apple Application Store. The app can be utilized to import laser styles from free vector websites, consisting of Etsy. The D1 can additionally be connected to a computer system by means of USB or WiFi. It can likewise transfer information via Wi-Fi or a huge ability TF card.
The D1 can etching on Poplar plywood, which is one of the most typically utilized timbers for laser cutters. The D1 can additionally reduce on other timbers, including tough maple, walnut, as well as rosewood. Its laser head is adjustable, allowing for a 50mm variety. It can likewise process products approximately 10mm thick, which suggests that it is able to etch on a wide range of products. The D1 is made for both residence and business usage.
The XTool D1 comes in two versions: the 20W variation and the 5W version. The 20W version has a bigger laser head, and also a smaller working location. The 5W model has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a faster device. Xtool D1 Diode Laser
The D1 includes a steel frame, which provides maximum stability and durability. It likewise has a simultaneous belt to boost movement precision. The belt’s moderate stress is required for accuracy, particularly when moving at broadband. The concurrent belt can additionally aid the equipment keep secure and also minimize vibration. It can likewise eliminate the movement space, enabling great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is the most powerful diode laser on the market. It produces clear lines down to 0.06 mm. This makes it a superb selection for mostly all engraving tasks. Its design is safe as well as reputable. It is optimal for local business and hobbyists.
It can etch various sorts of metal and wood. It has the capability to cut 8 to tenmm plywood in one pass. It likewise has the capacity to reduce natural leather and polymer.
It features a number of accessories. You can acquire the package pack that includes the Air Assist Set and Honeycomb Working Panel. It costs $119 as well as $269, respectively. You can likewise get a 1064nm laser head. This head reduces burn marks in plastic as well as is especially useful for delicate jewelry layouts. It likewise has a movement sensor as well as flame detection sensor.
It additionally includes an emergency situation quit switch. It can be controlled through WiFi as well as can import laser styles from cost-free vector websites like Etsy. You can likewise regulate it by means of the Makeblock XTool D1 application on Android and iOS.
It has a very good emphasis system. The laser crosshairs relocate as required and transfer to the structure of the art work. This makes the etching extremely precise. It can also be made use of to create a thickening result, which can be valuable when etching huge things.
The XTool D1 Pro has actually boosted features as well as laser power. It makes use of a 20W laser module to develop a beam of light that reduces objects in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It additionally has a higher speed. It can reach etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this machine is extremely brilliant. Next to the laser module, there is a swivelling arm which you pull out when you wish to focus the laser. It guarantees that you go down the directly the appropriate range from the material. Then you tighten up the thumb screw and rotate the arm back up. Xtool D1 Diode Laser
XTool D1 Special Features
Below are some of the leading Special Features of the XTool D1:
Wireless Connection
Device can be linked via USB or a Wi-fi. And you can additionally control with a smart device application on Android or iOS.
Trimming as well as Inscription Different Materials
Engrave: Timber, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Light Weight Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick things with this laser engraver. The equipment can cut timber, specifically Poplar plywood which is soft and also it is the favored timber for all laser cutters.
I would certainly prevent some plastics like PVC as well as plastic because it releases hydrogen chloride gas while being reduced. This gas is toxic and very harsh (your maker will certainly corrosion quickly).
We have actually tested the machine with inscription and reducing various products. You will certainly discover the results of our examinations few phases lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have seen on all other machines. This should allow for even more accuracy and also much less mechanical wobble when etching at high speeds. Xtool D1 Diode Laser
Advanced Stepper Electric Motor Drivers
The device has a really innovative controller board. It has Trinamic stepper electric motor chauffeurs which drive the motors with a pure sine wave. This way the electric motors are very accurate as well as quiet. The motorists also sustain homing treatment without using limitation changes as the vehicle drivers measure present via electric motors and discover the limit in this manner. This is why this machine does not require physical limit changes for homing.
The machine has motorists for 3 axis– so you can connect in the roller system as a Z axis instead of needing to detach one of the axis when working with a roller system.
XTool D1 Software
XTool D1 can be managed through Wi-Fi or USB. The laser engraver device immediately stops if an accidental touch occurs. This is great for individuals who are concerned concerning safety. The tool is also compatible with Windows and also Mac OS systems.
The XTool D1 software application is extremely easy to use. When you have actually the art work prepared, you can utilize the application to set up the laser. You can likewise tailor the laser setups and also create customized artwork. The app also includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting maker that can engrave over 100 materials. The laser engraver device is easy to use and also features a safety cover. The machine has a guarantee of one year.
XTool D1 Engraving
The XTool D1 is an extremely functional etching maker. It cam be used to etch on all kinds of products/.
Below is a checklist of materials as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively considered maker. Accurate, rapid and solidly constructed. It comes at a costs rate, however it is worth it for a person that wants an excellent and also practically a commercial quality table leading laser engraver with the ability of rapid cutting and specific inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The very first laser inscription and also cutting equipment on our listing is XTool D1 pro, the very best option to Glowforge. It is in top place due to the fact that it has actually obtained the Red Dot Layout 2022 Honor. The impressive style and also modern modern technology established this equipment apart from various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at once, and XTool D1-10W can reduce a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at once, and also XTool D1-10W can reduce 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and engrave a huge variety of materials, from something as slim as cells paper to something as thick as natural leather and wood panels.
XTool D1 is a diode laser engraving as well as cutting machine that is compatible with a large range of products, including various types of wood. Its effective as well as extremely concentrated laser can conveniently reduce and engraved wood with utmost precision as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser component, which is particularly made for steel and also plastic inscription. It can engrave different steels, including aluminum and also rare-earth elements. It can additionally do colored inscribing on different steels, consisting of aluminum.