What is the Makeblock XTool D1? Xtool D1 Air Assist
XTool D1 is a laser cutter that has been developed by Makeblock. Xtool D1 Air Assist
The firm was developed in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic College. The firm is dedicated to developing cutting-edge products to assist people reveal themselves via development. Since its creation, Makeblock has released a number of instructional robotics, in addition to a coding platform for youngsters. It also launched the MakeX Robotic Competitors.
The XTool D1 is a mobile laser engraver that can cutting and also engraving a range of materials. Its laser can remove complex shapes much faster than a scroll saw or jigsaw, and can be used for many different projects. In addition to inscription, the D1 can also be made use of for various other tasks, consisting of creating precious jewelry and lamp tones.
The D1 is a do it yourself kit that can be constructed in just regarding half an hour. Its room is foldable, allowing for simple mobility and reliable ventilation. It is additionally made from flame-retardant polyester, making it secure from dirt bits. The room additionally secures the functioning surface under the equipment.
The XTool D1 is geared up with a laser module that can engrave on metals and several various other products. It has actually an ultra-fine compressed laser area of 0.08 x 0.08 mm. This allows for finer inscription and also greater precision.
The D1 likewise has a high resolution of 1000 DPI, that makes it possible to etch on a vast array of materials. The D1 additionally has a built-in smart device application that can be downloaded from the Android Shop or the Apple Application Shop. The app can be used to import laser layouts from cost-free vector websites, including Etsy. The D1 can additionally be attached to a computer system via USB or WiFi. It can likewise transfer information via Wi-Fi or a big capacity TF card.
The D1 is capable of engraving on Poplar plywood, which is just one of the most generally utilized woods for laser cutters. The D1 can also cut on various other woods, including hard maple, walnut, as well as rosewood. Its laser head is flexible, permitting a 50mm range. It can likewise process products up to 10mm thick, which means that it has the ability to etch on a wide range of products. The D1 is developed for both residence and organization use.
The XTool D1 is available in two versions: the 20W version and the 5W version. The 20W variation has a larger laser head, and a smaller working area. The 5W version has a working area of 430 x 400 mm. It has a greater maximum speed of 400 mm/s, that makes it a much faster machine. Xtool D1 Air Assist
The D1 includes a steel framework, which offers maximum stability and durability. It additionally has a synchronous belt to improve motion accuracy. The belt’s moderate tension is needed for precision, especially when relocating at broadband. The synchronous belt can additionally aid the machine stay stable as well as reduce resonance. It can additionally get rid of the activity space, allowing for great vector graphics at broadband.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it a superb selection for almost all inscribing jobs. Its design is safe and dependable. It is optimal for small companies as well as hobbyists.
It can inscribe various types of metal as well as timber. It has the ability to reduce 8 to tenmm plywood in one pass. It likewise has the capacity to cut natural leather and also polymer.
It features a variety of accessories. You can get the bundle pack that consists of the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 and also $269, specifically. You can likewise obtain a 1064nm laser head. This head decreases melt marks in plastic and also is particularly useful for fragile fashion jewelry designs. It also has a movement sensing unit as well as flame discovery sensor.
It likewise features an emergency quit switch. It can be controlled with Wi-fi as well as can import laser styles from cost-free vector websites like Etsy. You can also manage it by means of the Makeblock XTool D1 application on Android and also iOS.
It has a very good emphasis system. The laser crosshairs relocate as required as well as relocate to the frame of the artwork. This makes the engraving very precise. It can likewise be made use of to produce a thickening result, which can be helpful when inscribing big things.
The XTool D1 Pro has boosted functions as well as laser power. It utilizes a 20W laser component to develop a beam of light that cuts items in one pass. It can cut through 8mm black acrylic and also 10mm basswood. It also has a higher speed. It can get to inscribing precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is very brilliant. Beside the laser component, there is a swivelling arm which you pull out when you intend to concentrate the laser. It ensures that you go down the directly the right distance from the material. Then you tighten the thumb screw and also rotate the arm back up. Xtool D1 Air Assist
XTool D1 Special Features
Right here are several of the top Special Attributes of the XTool D1:
Wireless Connectivity
Maker can be connected using USB or a WiFi. And also you can additionally regulate with a mobile phone app on Android or iphone.
Trimming and Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer as well as Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Fabric, Slate.
The Makeblock XTool D1 is also an extremely qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can cut more than 10mm thick things with this laser engraver. The maker can cut wood, especially Poplar plywood which is soft and it is the preferred wood for all laser cutters.
I would avoid some plastics like PVC and also plastic since it releases hydrogen chloride gas while being reduced. This gas is poisonous and also very corrosive (your machine will certainly rust promptly).
We have checked the device with inscription and cutting various products. You will certainly locate the outcomes of our examinations couple of chapters lower.
The Makeblock XTool D1 has steel rollers on all axis as opposed to the plastic ones we have actually seen on all various other equipments. This need to permit even more accuracy as well as less mechanical wobble when inscribing at broadband. Xtool D1 Air Assist
Advanced Stepper Electric Motor Drivers
The device has a very advanced controller board. It has Trinamic stepper electric motor chauffeurs which drive the electric motors with a pure sine wave. This way the motors are really exact and also silent. The vehicle drivers likewise support homing procedure without using limit changes as the drivers gauge current through electric motors and identify the limit this way. This is why this machine does not need physical restriction changes for homing.
The maker has drivers for 3 axis– so you can plug in the roller system as a Z axis rather than having to detach one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be managed using Wi-Fi or USB. The laser engraver device immediately stops if an accidental touch happens. This is great for people who are worried about safety and security. The device is likewise compatible with Windows and Mac OS systems.
The XTool D1 software is extremely easy to use. Once you have actually the art work prepared, you can make use of the application to establish the laser. You can additionally customize the laser settings as well as produce customized artwork. The application additionally includes a products list.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing device that can engrave over 100 products. The laser engraver device is easy to use and features a protective cover. The maker has a warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely versatile inscribing maker. It cam be utilized to etch on all kinds of materials/.
Below is a checklist of materials as well as functions that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out maker. Specific, fast and solidly constructed. It comes with a costs rate, but it deserves it for someone that wants an excellent as well as almost an industrial quality table leading laser engraver capable of rapid cutting and also exact engraving thanks to an effective 10W laser module.
Is XTool better than Glowforge?
The initial laser engraving as well as reducing equipment on our listing is XTool D1 pro, the most effective choice to Glowforge. It is in top place because it has actually obtained the Red Dot Layout 2022 Award. The exceptional design and also advanced modern technology set this maker aside from other devices on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, as well as XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm timber board at one time, as well as XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can reduce and also engrave a substantial variety of products, from something as slim as cells paper to something as thick as leather and also timber panels.
XTool D1 is a diode laser engraving as well as cutting device that works with a wide range of materials, including different sorts of wood. Its effective as well as extremely focused laser can conveniently reduce and engraved timber with utmost accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser component, which is especially created steel and also plastic inscription. It can inscribe different steels, including light weight aluminum as well as rare-earth elements. It can likewise do tinted inscribing on different metals, consisting of aluminum.