What is the Makeblock XTool D1? Xtool D1 Acrylic Settings
XTool D1 is a laser cutter that has actually been created by Makeblock. Xtool D1 Acrylic Settings
The firm was established in 2012 by Jasen Wang, who examined aircraft design at Northwestern Polytechnic University. The firm is dedicated to developing ingenious items to assist people express themselves through development. Given that its development, Makeblock has actually launched numerous instructional robots, as well as a coding platform for youngsters. It additionally introduced the MakeX Robotic Competition.
The XTool D1 is a mobile laser engraver that can reducing as well as etching a range of products. Its laser can eliminate elaborate forms much faster than a scroll saw or jigsaw, and can be utilized for various jobs. Along with inscription, the D1 can also be used for various other jobs, consisting of developing fashion jewelry and lamp shades.
The D1 is a do it yourself kit that can be set up in only about half an hour. Its room is collapsible, permitting easy mobility as well as reliable air flow. It is also made from flame-retardant polyester, making it secure from dirt fragments. The room also shields the functioning surface under the equipment.
The XTool D1 is outfitted with a laser component that can engrave on steels and numerous various other materials. It has an ultra-fine pressed laser area of 0.08 x 0.08 mm. This allows for finer engraving and also higher precision.
The D1 also has a high resolution of 1000 DPI, which makes it feasible to etch on a vast array of products. The D1 additionally has a built-in smartphone application that can be downloaded and install from the Android Store or the Apple Application Store. The application can be utilized to import laser layouts from totally free vector sites, consisting of Etsy. The D1 can likewise be attached to a computer system through USB or WiFi. It can also transfer information through Wi-Fi or a large capacity TF card.
The D1 can etching on Poplar plywood, which is one of the most typically used woods for laser cutters. The D1 can likewise cut on other woods, including difficult maple, walnut, and also rosewood. Its laser head is flexible, permitting a 50mm array. It can additionally refine products as much as 10mm thick, which means that it has the ability to inscribe on a wide array of materials. The D1 is developed for both residence and company use.
The XTool D1 is available in two designs: the 20W variation as well as the 5W version. The 20W version has a bigger laser head, and a smaller working location. The 5W design has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, that makes it a much faster equipment. Xtool D1 Acrylic Settings
The D1 features a steel structure, which offers optimum stability and also sturdiness. It also has a concurrent belt to enhance motion precision. The belt’s modest stress is required for accuracy, especially when moving at broadband. The synchronous belt can also assist the maker remain steady and also reduce resonance. It can likewise get rid of the motion gap, allowing for great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most effective diode laser on the marketplace. It creates clear lines down to 0.06 mm. This makes it a superb selection for almost all engraving tasks. Its layout is risk-free as well as trustworthy. It is excellent for small companies and also enthusiasts.
It can engrave various types of steel as well as wood. It has the ability to reduce eight to tenmm plywood in one pass. It additionally has the capability to cut leather as well as acrylic.
It features a number of accessories. You can buy the bundle pack that consists of the Air Assist Set and also Honeycomb Working Panel. It costs $119 and also $269, respectively. You can additionally get a 1064nm laser head. This head reduces burn marks in plastic and is particularly valuable for delicate fashion jewelry designs. It also has a motion sensor and fire detection sensing unit.
It also features an emergency situation stop button. It can be controlled via WiFi and can import laser styles from complimentary vector websites like Etsy. You can likewise manage it using the Makeblock XTool D1 application on Android and also iOS.
It has an excellent emphasis mechanism. The laser crosshairs move as needed as well as transfer to the frame of the art work. This makes the etching really accurate. It can additionally be made use of to produce a thickening result, which can be valuable when etching large things.
The XTool D1 Pro has enhanced functions as well as laser power. It uses a 20W laser component to develop a beam that cuts objects in one pass. It can cut through 8mm black acrylic as well as 10mm basswood. It also has a greater speed. It can get to etching accuracy of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating technique on this maker is really smart. Alongside the laser module, there is a rotating arm which you pull out when you wish to focus the laser. It assures that you go down the head on the correct distance from the product. Then you tighten the thumb screw and swivel the arm back up. Xtool D1 Acrylic Settings
XTool D1 Special Features
Below are several of the top Unique Functions of the XTool D1:
Wireless Connectivity
Machine can be attached by means of USB or a Wi-fi. As well as you can additionally control with a smart device application on Android or iOS.
Trimming and also Inscription Different Products
Engrave: Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Area Layer Metal, 304 Mirror Stainless-steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise a very qualified laser cutter.
Cut: Cardboard, Non-woven Fabric, Wood Board, Acrylic, Some Thin Plastic Board, Sponge; cardboard …
You can reduce greater than 10mm thick things with this laser engraver. The machine can reduce wood, specifically Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would prevent some plastics like PVC and plastic considering that it launches hydrogen chloride gas while being reduced. This gas is hazardous as well as extremely harsh (your maker will certainly corrosion promptly).
We have tested the machine with engraving and reducing different materials. You will locate the results of our examinations few chapters lower.
The Makeblock XTool D1 has steel rollers on all axis instead of the plastic ones we have seen on all various other equipments. This ought to allow for even more accuracy and much less mechanical wobble when inscribing at high speeds. Xtool D1 Acrylic Settings
Advanced Stepper Electric Motor Drivers
The machine has an extremely advanced controller board. It has Trinamic stepper electric motor drivers which drive the motors with a pure sine wave. In this manner the electric motors are extremely precise and silent. The motorists also sustain homing treatment without utilizing restriction changes as the vehicle drivers gauge present with motors and also find the limit by doing this. This is why this device does not require physical limitation switches for homing.
The equipment has drivers for 3 axis– so you can plug in the roller system as a Z axis as opposed to having to detach one of the axis when collaborating with a roller system.
XTool D1 Software
XTool D1 can be controlled using Wi-Fi or USB. The laser engraver tool instantly quits if an accidental touch happens. This is excellent for people that are concerned regarding safety. The device is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software program is very easy to use. As soon as you have actually the artwork prepared, you can use the application to establish the laser. You can likewise tailor the laser setups and create customized art work. The application likewise consists of a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser cutting machine that can inscribe over 100 products. The laser engraver device is easy to use and includes a safety cover. The equipment has a service warranty of 12 months.
XTool D1 Engraving
The XTool D1 is an extremely functional inscribing maker. It cam be made use of to etch on all sorts of products/.
Here is a list of materials as well as features that the XTool D1 boasts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is a very well considered device. Specific, rapid and sturdily built. It comes with a premium rate, but it is worth it for a person that wants an excellent as well as almost a commercial quality table leading laser engraver efficient in rapid cutting as well as exact inscription thanks to a powerful 10W laser component.
Is XTool better than Glowforge?
The first laser inscription and also reducing device on our checklist is XTool D1 pro, the very best choice to Glowforge. It is in top place since it has actually received the Red Dot Layout 2022 Award. The exceptional layout and also state-of-the-art innovation established this device in addition to other machines on the marketplace.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board at the same time, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can reduce 6mm wood board at one time, and XTool D1-10W can reduce 10mm wood board at once.
Can XTool D1 cut leather?
XTool can reduce and inscribe a massive variety of products, from something as slim as tissue paper to something as thick as leather and timber panels.
XTool D1 is a diode laser engraving and reducing machine that is compatible with a wide range of materials, consisting of various types of wood. Its effective and highly concentrated laser can conveniently cut and inscribed timber with best accuracy as well as precision.
Can the XTool D1 engrave alliminum?
You can likewise get the infrared laser module, which is especially created metal and also plastic inscription. It can inscribe different steels, including aluminum and also precious metals. It can additionally do tinted etching on various metals, consisting of light weight aluminum.