What is the Makeblock XTool D1? D7 Xtool Scan Tool
XTool D1 is a laser cutter that has actually been produced by Makeblock. D7 Xtool Scan Tool
The company was developed in 2012 by Jasen Wang, who examined aircraft style at Northwestern Polytechnic College. The firm is devoted to producing ingenious products to aid people share themselves with creation. Since its development, Makeblock has launched several instructional robots, in addition to a coding platform for kids. It also introduced the MakeX Robot Competitors.
The XTool D1 is a mobile laser engraver that is capable of cutting as well as engraving a variety of products. Its laser can remove complex forms much faster than a scroll saw or jigsaw, and can be utilized for various tasks. In addition to inscription, the D1 can additionally be used for other tasks, including producing jewelry and also lamp tones.
The D1 is a DIY set that can be assembled in just about half an hour. Its unit is collapsible, permitting very easy transportability and reliable ventilation. It is likewise made of flame-retardant polyester, making it risk-free from dirt fragments. The enclosure also protects the working surface area under the equipment.
The XTool D1 is outfitted with a laser module that can engrave on steels and several various other products. It has actually an ultra-fine pressed laser spot of 0.08 x 0.08 mm. This permits finer inscription as well as higher precision.
The D1 also has a high resolution of 1000 DPI, which makes it possible to etch on a variety of materials. The D1 also has an integrated smartphone application that can be downloaded and install from the Android Shop or the Apple App Shop. The app can be made use of to import laser layouts from complimentary vector sites, consisting of Etsy. The D1 can also be attached to a computer system via USB or WiFi. It can also transfer data using Wi-Fi or a huge capacity TF card.
The D1 is capable of inscribing on Poplar plywood, which is just one of one of the most generally utilized woods for laser cutters. The D1 can also reduce on various other woods, consisting of hard maple, walnut, and also rosewood. Its laser head is flexible, allowing for a 50mm range. It can likewise process products approximately 10mm thick, which means that it has the ability to engrave on a wide variety of materials. The D1 is developed for both residence as well as organization usage.
The XTool D1 can be found in two designs: the 20W version and also the 5W model. The 20W variation has a bigger laser head, and also a smaller sized working location. The 5W model has a working area of 430 x 400 mm. It has a higher maximum speed of 400 mm/s, which makes it a faster maker. D7 Xtool Scan Tool
The D1 includes a steel structure, which provides optimum stability and also toughness. It also has a simultaneous belt to enhance activity accuracy. The belt’s moderate stress is required for accuracy, specifically when relocating at high speeds. The synchronous belt can also aid the maker stay steady and lessen resonance. It can likewise eliminate the activity void, permitting great vector graphics at high speeds.
Order Your XTool Laser Products Here – Best Prices Guaranteed
XTool D1 Specification
| Parameter | Value |
|---|---|
|
Engraving Size
|
432 * 406 mm (17 * 16 inch)
|
|
Engraving Materials
|
Wood, Bamboo, Cardboard, Plastic, Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Metal, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Cloth, Slate;
|
|
Laser Output Optical Power
|
10W
|
|
Laser Wavelength
|
450nm
|
|
Focusing Method
|
Fixed focus laser
|
|
Operating Software
|
Makeblock LaserBox Basic, LightBurn, Android and iOS
|
|
Input voltage
|
AC100-240V, 50/60Hz
|
|
Weight
|
5kg
|
|
Warranty
|
One Year
|
XTool D1 Laser Diode
XTool D1 Laser Diode is one of the most powerful diode laser on the marketplace. It produces clear lines down to 0.06 mm. This makes it an outstanding selection for almost all engraving jobs. Its design is secure and also reliable. It is ideal for small companies and hobbyists.
It can etch various kinds of steel as well as timber. It has the capacity to reduce 8 to tenmm plywood in one pass. It likewise has the ability to cut natural leather as well as polymer.
It includes a number of devices. You can acquire the bundle pack that includes the Air Help Establish as well as Honeycomb Working Panel. It sets you back $119 as well as $269, respectively. You can likewise obtain a 1064nm laser head. This head minimizes burn marks in plastic and is particularly beneficial for delicate precious jewelry designs. It additionally has a movement sensor and also flame detection sensor.
It likewise includes an emergency quit switch. It can be controlled through WiFi and can import laser designs from complimentary vector sites like Etsy. You can likewise manage it by means of the Makeblock XTool D1 application on Android and also iphone.
It has a great emphasis mechanism. The laser crosshairs relocate as needed and also relocate to the structure of the art work. This makes the etching very accurate. It can additionally be used to develop a thickening impact, which can be beneficial when etching big products.
The XTool D1 Pro has actually enhanced attributes and also laser power. It uses a 20W laser component to produce a light beam that reduces things in one pass. It can puncture 8mm black acrylic as well as 10mm basswood. It likewise has a greater rate. It can get to etching precision of 0.0004 inches.
XTool D1 Focusing Procedure
The concentrating method on this machine is really clever. Next to the laser component, there is a pivoting arm which you pull out when you want to concentrate the laser. It guarantees that you go down the directly the correct distance from the product. After that you tighten the thumb screw as well as pivot the arm back up. D7 Xtool Scan Tool
XTool D1 Special Features
Right here are several of the top Special Functions of the XTool D1:
Wireless Connection
Device can be linked via USB or a Wi-fi. And also you can also control with a smartphone app on Android or iphone.
Cutting and Inscription Different Materials
Engrave: Wood, Bamboo, Cardboard, Plastic, Natural Leather, PCB Board, Aluminum Oxide, Non-reflective, Electroplating Layer and Paint Surface Layer Steel, 304 Mirror Stainless Steel, Glass, Ceramics, Cotton Towel, Slate.
The Makeblock XTool D1 is likewise an extremely capable laser cutter.
Cut: Cardboard, Non-woven Fabric, Timber Board, Polymer, Some Thin Plastic Board, Sponge; cardboard …
You can reduce more than 10mm thick stuff with this laser engraver. The device can reduce wood, particularly Poplar plywood which is soft and also it is the recommended wood for all laser cutters.
I would prevent some plastics like PVC and also vinyl considering that it releases hydrogen chloride gas while being cut. This gas is hazardous as well as really harsh (your maker will corrosion swiftly).
We have evaluated the machine with engraving as well as cutting various materials. You will discover the outcomes of our tests couple of phases lower.
The Makeblock XTool D1 has steel rollers on all axis rather than the plastic ones we have seen on all other equipments. This must permit more accuracy and also less mechanical wobble when inscribing at broadband. D7 Xtool Scan Tool
Advanced Stepper Motor Drivers
The device has an extremely innovative controller board. It has Trinamic stepper motor motorists which drive the motors with a pure sine wave. This way the motors are extremely specific and also quiet. The motorists likewise support homing procedure without using limitation changes as the motorists measure current through electric motors as well as identify the limit by doing this. This is why this device does not require physical limitation switches for homing.
The maker has motorists for 3 axis– so you can plug in the roller system as a Z axis as opposed to needing to disconnect one of the axis when dealing with a roller system.
XTool D1 Software
XTool D1 can be regulated using Wi-Fi or USB. The laser engraver device automatically stops if an unexpected touch happens. This is fantastic for individuals who are concerned concerning safety and security. The tool is likewise compatible with Windows as well as Mac OS systems.
The XTool D1 software application is really easy to use. Once you have the art work prepared, you can use the application to set up the laser. You can likewise customize the laser setups as well as produce customized artwork. The application additionally includes a products checklist.
XTool D1 Pro is an upgrade to the previous XTool D1 laser cutter. It is a high-accuracy laser reducing machine that can engrave over 100 products. The laser engraver device is easy to use and also includes a safety cover. The machine has a warranty of year.
XTool D1 Engraving
The XTool D1 is a very versatile inscribing machine. It cam be utilized to inscribe on all sorts of products/.
Here is a listing of products as well as attributes that the XTool D1 flaunts:
- Vector Image Engraving
- Aluminium Engraving
- Acrylic Engraving And Cutting
- Plywood Cutting
- Hardwood Cutting
- Stainless Steel Engraving
- Photo Engraving
FAQ
Is the XTool D1 worth it?
Makeblock XTool D1 is an effectively thought out equipment. Exact, fast and sturdily constructed. It comes with a premium cost, however it deserves it for somebody that wants an excellent and also almost a commercial quality table leading laser engraver efficient in rapid cutting and specific inscription thanks to a powerful 10W laser module.
Is XTool better than Glowforge?
The first laser engraving and also reducing maker on our checklist is XTool D1 pro, the very best choice to Glowforge. It remains in top place because it has gotten the Red Dot Design 2022 Award. The superior style and state-of-the-art modern technology set this machine apart from various other equipments on the market.
Can the XTool D1 cut wood?
XTool D1-5W can reduce a 4mm basswood board simultaneously, and XTool D1-10W can cut a 6mm basswood board
How thick wood can XTool D1 cut?
XTool D1-5W can cut 6mm wood board at once, and also XTool D1-10W can cut 10mm wood board at one time.
Can XTool D1 cut leather?
XTool can cut and also engrave a huge selection of products, from something as slim as cells paper to something as thick as leather and also wood panels.
XTool D1 is a diode laser engraving as well as reducing equipment that works with a vast array of materials, consisting of different kinds of timber. Its powerful and also very focused laser can conveniently reduce and engraved timber with utmost accuracy and accuracy.
Can the XTool D1 engrave alliminum?
You can likewise obtain the infrared laser module, which is especially created steel as well as plastic engraving. It can inscribe numerous metals, consisting of aluminum and also rare-earth elements. It can additionally do tinted inscribing on various steels, consisting of light weight aluminum.